TM 5-3895-370-14&P
(2)
Assemble cable assembly as follows:
(a)
Install thimble (43) and wire rope (42) on
eyebolt (39).
(b)
Install two wire rope clamp assemblies
(41) and four nuts (40) on wire rope (42).
(c)
Install nut (38) on eyebolt (39).
(3)
Install washer (35) and lockpin (34) on side joint
section (8).
(4)
Install cotter pin (33) on lockpin (34).
NOTE
Install
setscrew
leaving
exposed
thread length measured at removal.
(5)
Install spring (37) and setscrew (36) on lockpin
(34).
(6)
Install two links (32), screws (31), and locknuts
(30) on side joint section (8).
5-241
