TM 5-3895-370-14&P
5-60. SIDE JOINT SECTION REPAIR (CONT).
(7)
Loosen two nuts (20) and remove two wing nuts
(21).
(8)
Pull two handles (22) away from side joint
section (8) and remove end cap assembly (23)
and gasket (24). Discard gasket.
(9)
Remove two roll pins (25) from side joint section
(8).
(10)
Disassemble end cap assembly as follows:
(a)
Remove two nuts (20) and handles (22)
from link bar clamps (26).
(b)
Remove two locknuts (27), screws (28),
and link bar clamps (26) from end cap
(29). Discard locknuts.
5-238
