TM 5-3895-370-14&P
c. Assembly.
(1)
Install male hinge joint (4) with female hinge joint
(10).
NOTE
Apply a coat of lubricating oil on all
preformed
packings
prior
to
installing.
(2)
Install four preformed packings (12) on two
thread bearing sleeves (11).
(3)
Using bearing sleeve removal tool, install two
threaded bearing sleeves (11) and female hinge
joint (10).
WARNING
Adhesive causes immediate bonding
on
contact
with
eyes,
skin,
or
clothing and also gives off harmful
vapors. Wear protective goggles and
use
in
well-ventilated
area.
If
adhesive gets in eyes, try to keep
eyes open; flush eyes with water for
15
minutes
and
get
immediate
medical attention.
NOTE
· Apply a coat of lubricating oil on
two gaskets prior to installing.
· Apply a coat of sealing compound
on threads of two plugs prior to
installing.
(4)
Install two gaskets (9) and plugs (8) into female
hinge joint (10).
5-247
