TM 5-3895-370-14&P5-62. GATE VALVE ASSEMBLY REPAIR (CONT).(6)Insert stem (7) in lever (11) and place handle (2)on stem.NOTETo open valve rotate handleclockwise.(7)Rotate lever (11) and disc set (12) to openposition using handle (2).(8)Remove handle (2) and stem (7) from lever (11).NOTEObserve orientation of stop on ever.(9)Remove disc set (12) and lever (11) from valvebody (8).(10)Remove disc set (12) from lever (11).b. Cleaning/Inspection.WARNING·Drycleaning solvent (P-D-680) is TOXIC and flammable. Wear protective gogglesand gloves; use only in a well-ventilated area; avoid contact with skin, eyes, andclothes and do not breathe vapors. Keep away from heat or flame. Never smokewhen using solvent; the flash point for type I drycleaning solvent is 100°F (38°C)and for type II is140°F (60°C). Failure to do so may result in injury or death topersonnel. P-D-680 type III is a substitute for types I and II in this application. Theflash point for type III is 200°F (93°C).·If personnel become dizzy while using cleaning solvent, immediately get fresh airand medical help. If solvent contacts skin or clothes, flush with cold water. Ifsolvent contacts eyes, immediately flush eyes with water and get immediatemedical attention.(1)Clean all metal parts with drycleaning solvent.5-250
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
