TM 5-3895-370-14&P
(3)
Remove cotter pin (6), washer (7), clevis pin (8),
and left lower linkage (9) from swivel block (5).
Discard cotter pins.
(4)
Repeat Step (3) above to remove right lower
linkage (9).
(5)
Remove cotter pin (6), washer (10), clevis pin
(11), and left upper linkage (4) from swivel block
(5). Discard cotter pin.
(6)
Remove two cotter pins (12), washers (13),
clevis pin (14), and two swivel blocks (5) from
center support section (15).
(7)
Repeat Steps (5) and (6) above to disassemble
right upper linkage (4) and two swivel blocks (5).
(8)
Remove two cotter pins (16), clevis pins (17),
and lever rod assembly (18) from gate valve (19)
and upper on-off bar (20). Discard cotter pins.
5-225
