TM 5-5430-248-13&P
FIELD LEVEL MAINTENANCE
500 GALLON WATER DRUM DWDM5CG
SHACKLE ASSEMBLY REPLACEMENT
INITIAL SET-UP:
Materials/Parts Required:
Tools:
Cotter pin (WP 0020 00, Figure 2, Item 1)
General Mechanics Toolkit (WP 0025 00)
Shoulder bolt (WP 0020 00, Figure 2, Item 2)
Pliers (WP 0026 00, Item 11)
Shackle (WP 0020 00, Figure 2, Item 3)
SHACKLE ASSEMBLY REPLACEMENT
WARNING
The swivel plate is coated with an anticorrosive
material that contains cadmium. Do not heat, weld,
drill, or cut the swivel plate. These actions may
create dust or hazardous vapors which may cause
sickness or death to personnel.
To replace a shackle assembly follow the instructions below:
1. Remove cotter pin from the shoulder bolt with pliers (Figure 1, Item 1). Discard cotter pin.
2. Unscrew shoulder bolt from the lug of the swivel plate (Figure 1, Item 2).
3. Shackle will loosen from lug and remove shackle. (Figure 1, Item 3).
2
3
1
Figure 1. Removing the shackle assembly from the swivel plate.