TM 5-5430-248-13&P
FIELD LEVEL MAINTENANCE
500 GALLON WATER DRUM DWDM5CG
REMOVE/INSPECT/INSTALL/TEST SHACKLE, BEARING, SWIVEL PLATE,
SPACER PLATE, METAL PLATE, WIRE ROPE
INITIAL SET-UP:
Tools:
Equipment Condition:
Tool Kit, General Mechanic's (WP 0025 00, Item 1)
Torque Wrench (WP 0025 00, Item 2)
Screwdriver Attachment, Socket (WP 0025 00, Item 3)
Materials/Parts Required:
WP 0015 00
Cotter Pin (WP 0020, Figure 2, Item 1)
Detergent, Gen. Purpose (WP 0028, Item 1)
Cloth, Abrasive (WP 0028, Item 3)
Socketcap screws (WP 0020, Figure 2, Item 4)
Brush, Scrub (WP 0028, Item 4)
Valve coupler removed from drum
Personnel:
Two (77W)
REMOVAL OF HARDWARE
1. Remove both shackle assemblies from one side of the drum (WP 0013 00).
2. Remove adapter assembly (WP 0012 00).
3. Remove 10 sockethead screws (Figure 1, Item 2) that secure the bearing plate
(Figure 2, Item 3). Discard socketcap screws.
4. Remove bearing (Figure 1, Item 3) and swivel plate (Figure 1, Item 4).
5. Remove 20 sockethead screws (Figure 1, Item 5) from spacer plate (Figure 1, Item 5). This will
leave one sockethead screw attaching the spacer plate (Figure 1, Item 6) to the metal plate.
Discard socketcap screws.
0014 00-1