TM 9-2330-267-14&P
4-27. INTERVEHICULAR CABLE MAINTENANCE.
This Task Covers:
a.
Test
c.
Installation
b. Removal
d. Repair
Initial Setup:
Equipment Conditions:
l Intervehicular cable
vehicle (para 2-12).
Tools/Test Equipment:
Materials/Parts:
disconnected from towing
l Marker tags (as required) (Item 25, Appendix E)
l Five Iockwashers
s General mechanics tool kit
l Multimeter
1.
2.
3.
4.
5.
NOTE
Testing the intervehicular cable consists of a continuity check of the individual wires
that make up the intervehicular cable. Refer to paragraph 4-28 for wire function and
identification. Before disconnecting any wires, ensure that identification bands are
present.
Disconnect six plug connectors (1) of intervehicular cable (2) from chassis wiring harness.
Place red lead from multimeter in one of six plug connectors (1) and black on corresponding pin (8). Check for
continuity.
Repeat step 2 for all plug connectors (1) and pins (8).
If no continuity is found in one or more wires, remove and replace intervehicular cable (2).
If continuity is found, connect plug connectors (1).
TA507015
4-42