TM 9-2330-267-14&P
4-27. INTERVEHICULAR CABLE MAINTENANCE (Con’t).
1.
Tag wires for installation if identification bands are missing or not legible (para 4-20).
2.
Remove six plug connectors (1) from clip assembly (7) and disconnect from chassis wiring harness.
3.
Remove two screws (3), Iockwashers (4), flatwashers (5), and securing strap (6). Discard Iockwashers.
4.
Remove three screws (12), flatwashers (11),
Iockwashers (10), and looped clamps (9) from
frame assembly. Discard Iockwashers.
5.
Remove intervehicular cable (2) from trailer.
c.
INSTALLATION
1.
Position intervehicular cable (2) on frame assembly and install three looped clamps (9), new Iockwashers (10),
flatwashers (11), and screws (12).
2.
Position intervehicular cable (2) and install securing strap (6), two flatwashers (5), new Iockwashers (4), and
screws (3).
3.
Connect six plug connectors (1) of intervehicular cable (2) to chassis wiring harness and place in clip assembly
(7).
NOTE
Repair of intervehicular cable consists of replacement of wire identification bands and
repair of plug connectors.
Refer to paragraph 4-26 for repair instructions.
FOLLOW-ON TASKS:
o Connect intervehicular cable to towing vehicle (para 2-10).
l Check operation of lights.
TA507016
4-43
