TM 10-4320-303-13
2.3.7 Assembly of Distribution Points . (Continued)
NOTE
Wrap antiseize tape in direction of threads.
ah. Wrap antiseize tape (item 9, appendix E) around threads of male quick disconnect coupling half (6)
and screw male quick-disconnect coupling half (6) into end of 2 inch gate valve (5).
ai. Push cam arms on female quick-disconnect coupling half (4) forward to open position.
CAUTION
To prevent leakage, close both cam arms at the same time.
Do not strike cam arms to close. Damage to couplings may result.
aj. Connect female quick-disconnect coupling half (4) on 2 inch gate valve (5) to male adapter on Y-
connection (1). Close cam arms.
ak. Push cam arms on discharge hose (7) forward to open position.
CAUTION
To prevent leakage, close both cam arms at the same time.
Do not strike cam arms to close. Damage to couplings may result.
al. Connect discharge hose (7) to male quick-disconnect coupling half (6) on 2 inch gate valve (5).
Close cam arms.
am. Push cam arms on Y-connection (8) forward to open position.
CAUTION
To prevent leakage, close both cam arms at the same time.
Do not strike cam arms to close. Damage to couplings may result.
an. Connect female adapter on Y-connection (8) to discharge hose (7). Close cam arms.
ao. Push cam arms on two discharge hoses (9) forward to open position.
CAUTION
To prevent leakage, close both cam arms at the same time.
Do not strike cam arms to close. Damage to couplings may result.
ap. Connect two discharge hoses (9) to male adapters on Y-connection (8). Close cam arms.
aq. Repeat steps ag through ap to connect female quick-disconnect coupling half (10), 2 inch gate valve
(11), male quick-disconnect coupling half (12), discharge hose (13), Y-connection (14), and
discharge hoses (15).
2-58
