TM 10-4320-303-132.3.7 Assembly of Distribution Points. (Continued)Figure 2-24. Hypochlorination Unit Model 1955-1 and Model A-506131 Installation.NOTEWrap antiseize tape in direction of threads.y. Wrap antiseize tape (item 9, appendix E) around threads on female quick disconnect coupling half(Figure 2-24, 1). Screw female quick-disconnect coupling half (1) into inlet port (Figure 2-23, 10) onhypochlorination unit (Figure 2-24, 2).z. Push cam arms on female quick-disconnect coupling half (1) forward to open position.CAUTIONTo prevent leakage, close both cam arms at the same time.Do not strike cam arms to close. Damage to couplings may result.aa. Connect discharge hose (3) to female quick-disconnect coupling half (1) attached tohypochlorination unit (2). Close cam arms.NOTEWrap antiseize tape in direction of threads.ab. Wrap antiseize tape (item 9, appendix E) around threads on male quick disconnect coupling half (4).Screw male quick-disconnect coupling half (4) into outlet port (Figure 2-23, 11) on hypochlorinationunit (Figure 2-24, 2).ac. Push cam arms on discharge hose (5) forward to open position.CAUTIONTo prevent leakage, close both cam arms at the same time.Do not strike cam arms to close. Damage to couplings may result.ad. Connect discharge hose (5) to male quick-disconnect coupling half (4) on hypochlorination unit (2).Close cam arms.ae. Push cam arms on female quick-disconnect adapter on Y-connection (Figure 2-25, 1) forward toopen position.2-56
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
