TM 5-3820-256-10
c.
Operating Procedures.
(1)
Starting Engine. See Figure 2-32.
WARNING
Keep all covers and panels in place while operating. Protect yourself with dry insulating gloves and
clothing. Stop and disable the engine before inspecting or servicing. Stay clear of moving parts. Failure
to follow this warning may result in death or injury to personnel.
(a)
Push run/stop control fully into RUN position.
(b)
Place automatic idle control switch in AUTO IDLE ON position.
(c)
Place the starter switch in START position. Release starter switch when engine engages. Allow the
engine to run for a few minutes before applying a load.
Figure 2-32. Welder/Generator Control Panel
2-64
