TM 5-3820-256-10
(g)
Place the automatic idle control switch in AUTO IDLE OFF position when using power from the 115
vac receptacle. Place automatic idle control switch in AUTO IDLE ON position to weld.
(4)
Power Plant Operation.
WARNING
Electric shock can kill. Do not touch live electrical parts. Do not connect to any electrical system
normally supplied by utility power unless a proper transfer switch and grounding procedure are
employed. Disconnect welding cables when using auxiliary power. Failure to follow these warnings may
result in death or injury to personnel.
(a)
Make connections to 120 volt, 30 amp ac receptacle. If a connection to 120/240 vac terminal strip is
desired, follow steps (b) through (d); otherwise, skip to step (e). See Figure 2-33.
Figure 2-33. 120/240 Volts AC Terminal Strip
2-66
