STAMPED ANGLE SPRING CLUTCH
Loosen the mounting bolts around the flywheel in a criss-
cross pattern to prevent cocking and bending of the
clutch mounting bolts Do Not Remove the Bolts.
NOTE: Because of the weight of a 14" clutch, the one
piece adapter ring and the strap drive intermediate plate,
Install two guide studs in the top mounting bolt holes to
facilitate removal
Now remove the mounting bolts and carefully remove the
clutch assembly.
Remove the spline aligning tool and rear driven disc.
Remove the one-piece adapter ring and strap drive
intermediate plate. Finally, remove the front driven disc.
CTS-4195 Page 9
