SERVICE MANUAL
CRANKSHAFT, MAIN BEARINGS, FLYWHEEL & CRANKCASE
Section 6
Figure 12. - Limits for Undersize Crankshaft Grinding
*Grinding Limits:
Maximum allowable taper on crankpins and journals 0.0038 mm per 25.4 mm of length (0.00015 per Inch of
length).
Crankpins and journals must be polished to 20 Micro-inch maximum - to 5 Micro-Inch minimum, and must not be
over 0.003 mm (0.0005 inch) out of round.
CGES-185-3
PRINTED IN UNITED STATES OF AMERICA
Page 11
