TM 5-3825-229-14&P
4-13. CONTROL PANEL INDICATORS (cont)
b. Removal.
(1)
Unscrew two screws (1) on right side of panel (2). Open panel (2).
(2)
Tag and remove wire(s) (3) from indicator light (4).
(3)
Remove nut (5) and washer (6) holding indicator light (4) to panel (2).
(.4) Remove indicator light (4).
c. Installation.
(1)
Install indicator light (4) in hole in panel (2).
(2)
Secure with nut (5) and washer (6).
(3)
Connect wire(s) (3) to light (4).
(4)
Close panel (2) and install two screws (1).
(5)
Refer to para. 4-22 and connect cables to battery.
4-14. CONTROL PANEL CABLES
THIS TASK COVERS:
a.
Testing
b.
Removal
c.
Installation
INITIAL SETUP:
Tools Required:
Equipment Conditions:
Nomenclature:
Ref
Conditions
General Mechanics
4-22 Battery cables disconnected
Tool Kit
WARNING
Electrical shock hazard exists. Disconnect battery cables (para. 4-22).
4-30
