OIL PUMP AND OIL PRESSURE REGULATING VALVE (cont)

OIL PUMP AND OIL PRESSURE REGULATING VALVE (cont) - TM-5-3825-229-14P_276

OIL PUMP AND OIL PRESSURE REGULATING VALVE (cont) - TM-5-3825-229-14P_278

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
259

TM 5-3825-229-14&P 5-12. OIL PUMP AND OIL PRESSURE REGULATING VALVE (cont) d. Oil Pressure Regulating Valve. (1) Removal. (a) Refer to para. 5-11 and remove the oil pan. (b) The oil pressure regulating valve is mounted in a port in the bottom of the crankcase forward of the oil filter. (c) Use a flat bottom punch on drift pin and drive spring pin (1) from crankcase. (d) Remove washer (2), spring (3) and valve piston (4) from crankcase. (2) Cleaning, Inspection and Repair. WARNING Wear protective goggles when using the cleaning solvent. Avoid contact with the eyes. If contact occurs, flush eyes with cold water for 5 minutes and seek immediate medical attention. Dry cleaning solvent (PD-680) is both toxic and flammable. Avoid prolonged breathing of vapors. Avoid skin contact. Use only in a well-ventilated area. Keep away from open flame. Flash point of solvent is 138°F (59C). 5-35

Privacy Statement
Press Release
Contact