OIL PUMP AND OIL PRESSURE REGULATING VALVE

OIL PUMP AND OIL PRESSURE REGULATING VALVE (cont) - TM-5-3825-229-14P_275

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
256

TM 5-3825-229-14&P 5-12. OIL PUMP AND OIL PRESSURE REGULATING VALVE THIS TASK COVERS: a. Removal c. Installation b. Cleaning, Inspection, and Repair d. Oil Pressure Regulating Valve INITIAL SETUP: Tools Required: Equipment/Materials Required: Nomenclature: Cleaning Solvent (Item 13, Appendix E) Goggles (Item 9, Appendix E) General Mechanics Tool Kit Equipment Conditions: Valve Spring Tester Ref. Conditions 5-6 Engine assembly removed 5-11 Oil pan removed a. Removal. (1) Remove screw (1) and washer (2) securing oil pump pickup tube (5) to crankcase. (2) Remove three screws (3) and washers (4) and remove oil pump pickup tube (5). Remove gasket (6). (3) Remove screw and washer (7) and remove oil pump assembly body (8) with gear (9) inside body. (4) Before removing pump gear (9) from body, mark face of gear with word TOP to aid in correct installation. 5-32

Privacy Statement
Press Release
Contact