FLYWHEEL HOUSING - TM-5-3825-229-14P

FLYWHEEL AND RING GEAR (cont) - TM-5-3825-229-14P_268

FLYWHEEL HOUSING (cont) - TM-5-3825-229-14P_270

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
251

TM 5-3825-229-14&P 5-10. FLYWHEEL HOUSING THIS TASK COVERS: a. Removal c. Installation b. Inspection INITIAL SETUP: Personnel Required: 2 Tools Required: Equipment Conditions: Nomenclature: Ref. Conditions General Mechanics 4-59 Starter motor removed Tool Kit 5-6 Engine removed Wooden Blocking 5-9 Flywheel and ring gear removed Crane or Lifting Device a. Removal. (1) Attach a chain and hooks to the flywheel housing (5). Lift housing and rear of engine to clear floor. Place wooden blocking under oil pan and rear of engine forward of flywheel housing to prevent engine from tipping backwards when flywheel housing is removed. (2) Remove two capscrews (1) with flat washers (2) from top of flywheel housing. 5-27

Privacy Statement
Press Release
Contact