B - Before
D - During
A - After
W - Weekly
M - Monthly
Item
Interval
Item to Be
Procedure
Check for and have repaired or
Equipment is Not
Ready/Available
No.
B D A W M Inspected
adjusted as necessary
If:
TM 5-3895-370-14&P
2-8. OPERATOR PMCS TABLE (CONT).
Table 2-2. Operator Preventive Maintenance Checks and Services - CONT.
NOTE:
Within designated interval, these checks are to be performed in the order listed.
RIGHT SIDE
OF
DISTRIBUTOR
- CONTINUED
12
Right Wheel
Hub
Inspect for leakage.
Class III oil leak is present or fill
plug missing.
13
Right Wheel
a.
Check tire for obvious damage or
a.
Tire flat.
and Tire
underinflation.
b.
Check wheel for cracked, bent,
b.
Cracked, bent, or broken
or broken surfaces.
wheel surfaces.
c.
Check for loose, bent, or missing
c.
Two or more missing
lugnuts or studs.
lugnuts or studs.
14
Right Side
Visually inspect fender for obvious
Fender missing.
Fender
damage.
15
Tool Box and
Inspect tool box and storage box
Either box missing.
Storage Box
for damage or loose, damaged, or
missing fasteners.
REAR OF
DISTRIBUTOR
16
Main Frame
Visually inspect for obvious
Broken welds, cracks, or bends.
(Rear)
damage such as broken welds,
cracks, or bends.
17
Support Jacks
Visually inspect for obvious
damage, bent or broken pins or
damaged base.
18
Hyd. Cylinders,
Look for signs of leakage around
Class III hydraulic oil leak is
Hoses, and
cylinders, hoses, and fittings.
present.
Fittings
2-10
