B - Before D - During A - After W - Weekly M - Monthly Item Interval Item to Be Procedure Check for and have repaired or Equipment is Not Ready/Available No. B   D   A   W   M Inspected adjusted as necessary If: TM 5-3895-370-14&P Table 2-2.  Operator Preventive Maintenance Checks and Services - CONT. NOTE: Within designated interval, these checks are to be performed in the order listed. FRONT OF DISTRIBUTOR - CONTINUED 5 Main Frame Visually inspect lunette for damage Lunette is cracked or damaged. (front) and that would impair operation.  If Lunette damaged, notify unit maintenance. 6 Safety Chains Check safety chains for excessive Safety chains are damaged due wear. to excessive wear. 7 Intervehicular Inspect cable ends and cable for Damaged connector/cable or Cables and cuts, cracks or bare and broken proper connection cannot be Connector wires. made. 8 Air Brake Lines Inspect for obvious damage to air Any damaged lines, fittings, and Gladhands lines, fittings, or gladhand gladhands, or missing or preformed packings. damaged preformed packings. 9 Decon. Visually inspect decontamination Decontamination bracket Apparatus bracket for obvious damage and missing or damaged. Assembly missing components (Refer to TM 3-4230-214-12&P). RIGHT SIDE OF DISTRIBUTOR 10 Hydraulic Look for dirt and debris that may Cooler obstruct the cooler fins. WARNING Do not fill tank with engine running, while smoking, or near an open flame.  Never overfill tank or spill fuel. Injury to personnel may result. 11 Fuel Tank a.  Check fuel tank, hoses, and a.  Class III fuel leak is present. fittings for leaks or damage. b.  Check fuel level.  Fill as necessary (para 3-7). 2-9