B - Before D - During A - After W - Weekly M - Monthly Item Interval Item to Be Procedure Check for and have repaired or Equipment is Not Ready/Available No. B   D   A  W  M Inspected adjusted as necessary If: TM 5-3895-370-14&P 2-8.  OPERATOR PMCS TABLE (CONT). Table 2-2.  Operator Preventive Maintenance Checks and Services - CONT. NOTE: Within designated interval, these checks are to be performed in the order listed. ENGINE - CONTINUED 36 Dust Valve a. Squeeze bottom of dust valve to release dust and debris. b. Remove and clean dust valve. 37 Fuel Lines and Inspect fuel lines and filter for Class III fuel leakage is Filter evidence of leakage. present. 38 Oil Pan and Look for signs of leakage and/or Class III hydraulic oil leakage Filter damage around oil pan, filter, lines, is present. sampling valve, and fittings. 39 Engine Oil Check engine oil level.  Notify unit Oil level is below LOW mark Level maintenance if below LOW mark on dipstick. on dipstick (para 3-6). 40 Water Pump Inspect for leaks or damage around Class III coolant leakage is Assembly water pump, hoses, and fittings. present. 41 Radiator a. Inspect for leaks and/or damage a. Class III coolant leakage is Assembly around radiator.   present. b. Look for dirt and debris that may clog the radiator. c. Check coolant level (para 3-8). 42 Thermostat Inspect for leaks around Class III coolant leakage is thermostat. present. 43 Fan Shroud Inspect fan shroud for any damage Any damage that would impair or loose or missing fasteners. mission. 2-14