B - Before D - During A - After W - Weekly M - Monthly Item Interval Item to Be Procedure Check for and have repaired or Equipment is Not Ready/Available No. B   D   A  W  M Inspected adjusted as necessary If: TM 5-3895-370-14&P 2-8.  OPERATOR PMCS TABLE (CONT). Table 2-2.  Operator Preventive Maintenance Checks and Services - CONT. NOTE: Within designated interval, these checks are to be performed in the order listed. LEFT SIDE OF DISTRIBUTOR - CONTINUED 27 Left Wheel and a. Check tire for obvious damage a. Tire flat. Tire or underinflation. b. Check wheel for cracked, bent, b. Cracked, bent, or broken or broken surfaces.   wheel surfaces. c. Check for loose, bent, or missing c. Two or more missing lugnuts or studs. lugnuts or studs. WARNING Do    not    fill    tank    with    engine running, while smoking, or near an  open  flame.    Never  overfill tank   or   spill   fuel.      Injury   or death to personnel may result. 28 Flushing Tank a. Ensure flushing tank is full a. Flushing tank empty. (para 3-7). b. Check flushing tank, lines, and b. Class III fuel leak is present. connections are secure and without leaks or damage. 29     Hydraulic Tank a. Visually inspect tank, lines, and a. Class III hydraulic oil fittings for leaks or damage. leakage is present. b.   Fill    hydraulic    tank    as    necessary (para 3-10). c.   Inspect   strainer   and   fill   cap   for damage. 2-12