TM 5-3895-370-14&P
b. Disassembly.
(1)
Remove access cover (1) and ring seal (2) from
gear cover (3). Discard ring seal.
(2)
Remove and discard oil seal (4).
c. Cleaning/Inspection.
(1)
Clean all gasket material from gear housing and
gear cover.
(2)
Wipe off dirt and oil from manifold cover, belt
guide, and gear cover with clean cloth.
(3)
Check all parts for cracks, excessive wear, and
other
damage.
Replace
all
parts
failing
inspection.
d. Assembly.
(1)
Install oil seal (4) in gear cover (3).
(2)
Install ring seal (2) and access cover (1).
e. Installation.
(1)
Install cover gasket (7).
(2)
Install gear cover (5) on gear housing (6) with 19
screws (3 and 4). Tighten screws 18 lb-ft (24
Nm).
(3)
Install belt guide (2) with screw (1). Tighten
screw 18 lb-ft (24 Nm).
NOTE
Follow-on
maintenance:
Install
crankshaft pulley (para 5-21).
END OF TASK
5-59