TM 5-3895-370-14&P
5-23. TIMING PIN ASSEMBLY REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Wheels chocked.
Wrench, torque
Para 2-10
Jackstand lowered.
Para 3-6
Front engine panel
Materials/Parts
removed.
Oil, lubricating (item 31, Appendix E)
Preformed packing
General Safety Instructions
Ring seal
If engine has previously been in operation, allow
time for cooling before performing procedure.
a. Removal.
NOTE
If replacing pin alone, perform step (1) only.
(1)
Remove retaining ring (1) and timing pin (2).
(2)
Remove and discard preformed packing (3) from timing pin (2).
NOTE
If timing housing is not being replaced, matchmark timing housing and gear
housing.
(3)
Remove two screws (4) and timing housing (5) from gear housing (6).
(4)
Remove and discard seal ring (7) from housing (5).
5-54