TM 5-3895-370-14&P
e. Installation.
(1)
Lubricate push rod (4) sockets and valves with
engine oil and install eight push rods in cylinder
head (5).
(2)
Install four rocker arm assemblies (3) with eight
screws (1 and 2). Tighten screws (1) alternately
at 216 lb-in (24 Nm). Tighten screws (2) in
following steps:
(a)
Step 1: 29 lb-ft (39 Nm).
(b)
Step 2: 62 lb-ft (84 Nm).
(c)
Step 3: 92 lb-ft (125 Nm).
NOTE
Follow-on maintenance:
Check torque on cylinder head screws (para
5-16).
Perform valve and rocker arm adjustments
(para 4-25).
END OF TASK
5-53