TM 5-3895-370-14&P
5-20. FLYWHEEL HOUSING REPLACEMENT (CONT).
b. Removal.
(1)
Remove eight screws (1) and flywheel housing (2) from engine block (3).
(2)
If damaged, remove and discard two ring dowels (4) from engine block (3).
c. Installation.
(1)
If removed, install two ring dowels (4) in engine block (3).
(2)
Install flywheel housing (2) on engine (3) with eight screws (1). Tighten screws 57 lb-ft (77 Nm) according to
pattern shown.
NOTE
Follow-on maintenance:
·
Install rear mounts (para 5-14).
·
Install flywheel (para 5-20).
END OF TASK
5-48
