TM 5-3895-370-14&P
b. Installation.
NOTE
If replacing pin alone, perform step (4) only.
(1)
Install seal ring (7) in housing (5).
NOTE
If timing housing is not replaced, aline matchmarks for correct installation.
(2)
Install housing (5) on gear case (6) with two screws (4). Tighten screws 48 lb-in. (5 Nm).
(3)
Install preformed packing (3) on timing pin (2).
CAUTION
Damage will result to housing if retaining ring is installed deeper than 0.059 in. (1.499 mm).
(4)
Lubricate timing pin (2) with engine oil and install timing pin in timing housing (5) with retaining ring (1).
NOTE
Follow-on maintenance: Install front engine panel (para 3-6).
END OF TASK
5-55
