TM 5-3895-370-14&P
(2)
Install diode (38) on rectifier bridge (30) with
fiber washer (37), washer (36), wire (35), and
nut (34).
(3)
Install capacitor (27) on rectifier bridge (30) with
washer (33) and screw (32).
(4)
Install bridge insulator (31), rectifier bridge (30),
and three screws (29 and 28) on housing (2).
(5)
Install capacitor (27) and assembled screw (26)
on housing (2).
(6)
Install terminal board (25) and two screws (24)
on housing.
(7)
Install wire clamp (23), terminal board (22), and
three screws (21) on housing (2).
(8)
Install stator (20) in housing (2).
(9)
Install two insulated washers (19 and 18),
washer (17), nut (16), lockwasher (15), and nut
(14) on housing (2).
(10)
Install brush assembly (13) in housing (2) with
lockwashers (12) and two screws (11).
(11)
Install regulator (10) and two screws (9) on
housing.
5-91