TM 5-3895-370-14&P
5-53.
BITUMINOUS PUMP REPLACEMENT/REPAIR (CONT).
NOTE
Insert brass bar through port opening
on casing between rotor teeth to
keep rotor and shaft assembly from
turning.
(9)
Bend up tang of lockwasher (10) and remove
nut (11) and lockwasher from shaft (12).
(10)
Remove two nuts (13) from packing gland (14).
WARNING
Rotor and shaft assembly weighs 104
lbs (47 kg). Two personnel are
required
to
remove
assembly.
Failure to do so will result in injury to
personnel.
(11)
Remove rotor (15) and shaft (12) from casing
(3).
(12)
Remove packing gland (14) and two screws (16)
from bracket (17).
(13)
Loosen four setscrews (18) and remove two end
caps (19) from bracket (17).
(14)
Remove two collars (20) and seals (21) from two
end caps (19). Discard seals.
5-192
