TM 5-3895-370-14&P
d.
Assembly.
(1)
If removed, install five plugs (30).
(2)
If removed, install four setscrews (18) loosely.
(3)
Heat bracket (17) in a suitable oven at 750
degrees F (399 degrees C) until bracket reaches
oven temperature.
WARNING
Bracket retains extreme heat. Wear
protective gloves when installing
bracket bushing. Failure to do so will
result in severe burns to personnel.
(4)
Install bracket bushing (29).
(5)
If removed, install two plugs (28) on casing (3).
WARNING
Pump casing weighs 154 lbs (70 kg).
Attach suitable lifting device prior to
installation. Failure to do so may
result in injury to personnel.
(6)
Attach suitable lifting device to casing (3).
(7)
With aid from assistant, position gasket (27) and
casing (3) on bracket (17) and install eight
screws (26). Tighten screws 100 to 110 lb-ft
(136-149 Nm).
(8)
Apply
lubricating
oil
to
seven
preformed
packings (24) and retaining washer (25).
(9)
Install retainer washer (25) and seven preformed
packings (24) in bracket (17).
5-195