TM 5-3895-370-14&P
5-53.
BITUMINOUS PUMP REPLACEMENT/REPAIR (CONT).
NOTE
Steps (21) thru (27) are for thrust
bearing clearance.
(21)
Loosen two setscrews (18) on bracket (17).
NOTE
·
Outer end cap is on the outer part
of flange and inner end cap is on
opposite side of packing gland.
·
Each notch on the end caps
represent 0.002 inches.
(22)
Loosen inner end cap (19) until three threads
are exposed.
(23)
Tighten outer end cap (19) until shaft (12)
cannot be turned.
(24)
Make reference mark on flange (17) alined with
notch on outer end cap (19).
(25)
Loosen outer end cap (19) five notches (0.010
inches).
(26)
Tighten inner end cap (19).
(27)
Tighten two setscrews (18) on flange (17).
5-198
