SECTION 7 - SPECIFICATIONS
7.
SPECIFICATIONS
Throughout the preceding sections, the manual has addressed boats in general. The following sections will deal
specifically with your boat.
CAUTION
DO NOT OVERLOAD DAVIT
If you purchased a davit with your boat, remember that the davit may be able to lift more than the boat can
provide a platform for. Swinging an overloaded davit outboard can cause flooding or capsize. An object in water
appears to weigh less. As soon as it clears the water it can pull the boat over and result in flooding.
7.1
GENERAL CHARACTERISTICS
If you purchased a standard vessel in the MonArk line, you will find picture, sketch and general characteristics
sheet attached. It may not be exactly the same as your boat, but it is generally the same. If your boat was a
custom design, you will find a Profile and General Arrangement drawing attached, not to scale. Your length,
beam and draft are given on this drawing.
7.2
LIST OF MACHINERY
Following the drawing, there is a listing of the major components of your boat. This should aid you in obtaining
spare parts. If, during the life of the boat, you change any equipment, change the list. Enter the new information
and draw a line through the old. This will be invaluable if the label plate becomes illegible.
7.3
TEST DATA
A copy of the test forms used during the testing program on your boat have-been attached. These contain the
actual weight, speed and performance characteristics of your boat, if the unit is supplied with power.
29
