SR 4 GENERATOR
DISASSEMBLY AND ASSEMBLY
GENERATOR REMOVAL
REMOVE GENERATOR FROM ENGINE
4450-11
1. Remove the rear panel and louvers from the
generator frame. Put pieces of cardboard or
sheet metal between the rotor and the starter.
See GENERATOR BEARING REMOVAL.
2. Remove cover (1) from the generator.
3. Remove bolts (4) that fasten the plates to the
flywheel.
4. Remove bolts (3) that fasten the generator to
the flywheel housing.
5. Fasten a hoist to the generator. Remove the
four bolts (2) that hold the generator on the
mount or rail.
6. If the generator is equipped with a control
panel, disconnect wires (5) from the engine
at the terminal strip.
7. Remove nut (6) and pull the conduit and
wires (5) out of the generator housing.
8. Remove the generator with a hoist.
138
