ROTOR ASSEMBLY

Electric Sets Without Supports at the Flywheel Housing (cont)

TM-55-1930-209-14P-9-4 Water Purification Barges (NSN 1930-01-234-2165) Electric Power System Manual
Page Navigation
160

SR 4 GENERATOR DISASSEMBLY AND ASSEMBLY ROTOR ASSEMBLY REMOVE ROTOR ASSEMBLY (VERTICAL METHOD) 4457-11 start by: a) remove generator from engine b) remove control panel 1. Remove the louvers (1) and panel (2) from back of generator frame. 2. Remove the side panels and frame on back of generator. Remove the retainers that hold the bearing in the cover. 3. Use a hoist to put the generator in a vertical position with the hub at the top. 4. Remove the plates (3), shims and the generator fan (4). Keep the plates and shims together for installation. 5. Remove the rotor assembly from the stator with a hoist. NOTICE Do not let the rotor make a contact with the stator when it is removed. 143

Privacy Statement
Press Release
Contact