SR 4 GENERATOR
DISASSEMBLY AND ASSEMBLY
STATOR ASSEMBLY
REMOVE STATOR ASSEMBLY
4453-11
start by:
a) remove rotor assembly (Horizontal Method)
1.
Remove the frame from the stator housing.
2.
Disconnect the wires from the voltage regulator
assembly. Put a mark on wires for identification.
3.
Remove the voltage droop transformer (2).
4.
Remove the bolts (1) that hold the voltage
regulator on the stator housing. Remove
voltage regulator.
5.
Remove covers (3) from the housing.
6.
The stator (4) is available to service if needed.
INSTALL STATOR ASSEMBLY
4453-12
1.
Install the covers on the housing.
2.
Install the voltage regulator assembly on the
housing.
3.
Install the voltage droop transformer.
4.
Connect the wires to the voltage regulator.
5.
Install the frame on the stator housing.
end by:
a) install rotor assembly (Horizontal Method)
147
