SR 4 GENERATOR
DISASSEMBLY AND ASSEMBLY
ROTOR ASSEMBLY
INSTALL ROTOR ASSEMBLY
(VERTICAL METHOD
4457-12
1.
Be sure the stator assembly and rotor assembly
are clean.
2.
Lift the rotor into position over the stator with a
hoist. Slowly lower the rotor into the stator. Be
sure the bearing is in position in the cover.
NOTICE
Do not let the rotor make a contact
with the stator when it is lowered into
the armature.
3.
Put the generator in a horizontal position with a
hoist.
4.
Put the generator fan over the hub. Install the
original amount of shims and plates (1) on the
hub.
5.
Install retainers (2) for the bearing.
6.
Install the frames, covers, louvers, and panels
on back of generator.
end by:
a. install generator on engine
b. install control panel
144
