SERVICE MANUAL
Fig. 29 Installing Front End Plate
1
Locating Pin
2
Front End Plate
3
Oil Grooves
3.
Install front end plate in housing with O-ring side
down,
Figure
29
(CW
pump
assembly
illustrated).
Fig. 30 Chamfered Edge of Cam Ring
1
Chamfered Edge
2Cam Ring
4.
Install
cam
ring
into
the
pump
housing
positioning it over the locating pin, Figure 31. If
pump assembly being serviced is equipped with
two locating pins, install second pin at this time.
Fig. 31 Installing Cam Ring
1
Locating Pin
2
Cam Ring
IMPORTANT
The cam ring has a chamfer on one
edge of the ring O.., Figure 30. Install
cam ring with chamfered edge down for
clockwise pumps and chamfered edge
up for counter clockwise pumps.
Fig. 32 Lubricate Pump Components
1
Cam Ring
2
Front End Plate
3
Housing Bushing
CTS-4027 - Page 18
PRINTED IN UNTIED STATES OF AMERICA
SERVICE MANUAL
