TM 5-3825-226-24
LIFT CYLINDERS
5.
Pull the cylinder away from rod (3) and the
head.
6.
Remove the nut that holds piston (4) to the rod
with tooling (C). Remove piston (4) from the
rod.
7.
Remove seal assembly (5) and ring (6) from the
piston.
8.
Move the cylinder on to the rod and head.
Install four 5/8"-11 NC x 4 in. (101.6 mm) long
bolts (7) to hold head (8) to the cylinder. Move
the cylinder and head off the rod.
9.
Remove bolts (7) and head (8) from the
cylinder.
10.
Remove the O-ring seal and back-up ring and
three seals (9) from head (8).
6-11
