Section V ORGANIZATIONAL MAINTENANCE PROCEDURES (cont)

Section V ORGANIZATIONAL MAINTENANCE PROCEDURES (cont) - TM-5-4320-301-13P_70

Section V ORGANIZATIONAL MAINTENANCE PROCEDURES (cont) - TM-5-4320-301-13P_72

TM-5-4320-301-13P Pump Centrifugal: Self-Priming Diesel Engine Driven Wheel Mounted 8 Inch 1500 GPM at 80 Foot Head (Model US90 CCD-1) Manual
Page Navigation
45

TM 5-4320-301-13&P TM 08936A-13&P/1 Section V ORGANIZATIONAL MAINTENANCE PROCEDURES (Cont’d.) 4-12. STAND ASSY, REPAIR REMOVAL a. Remove stand assy from FAWPSS by folding up and replacing with serviceable stand. Ensure cap is on end of nozzle when hanging on new stand NOTE Only disassemble the parts of stand that require repair or replacement. b. With a common screwdriver pry open three s-hooks (1) on chain ends and remove from sash chains (2) and legs (3/5). c. Remove two cotter pins (6) from clevis pins (4) in legs (3/5). d. Remove clevis pins (4) and separate clevis legs (5) from pivet leg (3). Change 8 4-15

Privacy Statement
Press Release
Contact