TM 5-4320-301-13&P
TM 08936A-13&P/1
4-14.
DISASSEMBLY AND REPACKAGING. Disassemble this system in reverse of assembly. Perform the following
prior to repackaging:
a.
Drain, dry, and then cap and plug all hose assys.
b.
Drain and dry all metal assys, such as valve and tee assys. Cap and plug these items, as applicable.
c.
Remove and retain the quick disconnect elbow from the suction and discharge side port nipples on the top of each
of the water storage and dispensing drums. Then attach a protective cap to each of these two nipples.
d.
Drain each drum by turning the gate wheel on the drain assy which is attached to the drain fitting, in the tank
bottom en, remove the drain hose assy and thread the protective plug into the drum drain fitting.
e.
Drain, collapse and fold each of the drums.
NOTE
The drums are now ready to be placed in suitable carrier or container.
f.
Remove drain plug on 125GPM pump and engine assy and drain water from pump. Install drain plug after water
has been drained from pump.
g.
Deleted.
Change 8 4-21/(4-22 blank)
