TM 5-3825-226-24
GOVERNOR
15.
Remove nut (32), bolt (31) and torque control
group (33) from the fuel injection pump housing.
NOTE: Keep all of the parts of the
torque control group together for
installation purposes.
16.
Push lever (36) toward the front of the fuel
injection pump housing and remove pin (34).
17.
Remove nut (35) and the screw from the fuel
injection pump housing.
18.
Remove the ring that holds lever (36) and remove
the lever from the dowel.
19.
Remove shield (37) from the camshaft with tool
(B).
CAUTION: Pull on the shield only a
small amount in each location, so it
will not have distortion or damage.
The metal of the shield is moved
(staked) around the camshaft and the
shield can be damaged when it is
removed. If the shield has damage,
use a new part for replacement.
20.
Install tool (C) to hold the camshaft.
21.
Remove bolts (38) that hold the flyweight
assembly to the camshaft. Remove the flyweight
assembly.
3-73
