TM 5-3825-226-24
GOVERNOR
7.
Remove seat assembly (14) and spring (16) from
the flyweight shaft.
8.
Remove seal (15) and the wire. Remove the
bolts, cover (13) and the gasket.
9.
If necessary, use tool (D) to remove ring (21)
from seat (18). Remove ring (20) and spool (19)
from seat (18). Remove seat (18) and springs
(17) from seat assembly (14).
10.
Remove shaft (22) from the top of the fuel
injection pump housing. Remove lever assembly
(23).
11.
Remove riser (25) from the flyweight shaft.
12.
Remove tool (C), the bolts, cover assembly (24)
and the gasket from the fuel injection pump
housing.
13.
Remove ring (30) from riser (26).
14.
Remove race (29), bearing (28) and race (27)
from riser (26).
3-72
