THERMOSTAT AND COOLING LINES (cont) - TM-5-3825-229-14P

THERMOSTAT AND COOLING LINES (cont) - TM-5-3825-229-14P_187

ENGINE SAFETY CONTROLS (cont) - TM-5-3825-229-14P_189

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
170

TM 5-3825-229-14&P 4-46A. THERMOSTAT AND COOLING LINES (cont) d. Cooling Lines (cont). (2) Installation (cont). (c) Install hose (2) to top of water pump (5) and secure with clamp (4). (d) Install hose (2) at top of radiator (3) and secure with clamp (1) (e) Fill radiator with proper antifreeze. Refer to 4-46, Service Engine, for procedure. 4-46B. ENGINE SAFETY CONTROLS THIS TASK COVERS: a. Water Temperature Switch b. Oil Pressure Switch INITIAL SETUP: Tools Required: Equipment Conditions: Equipment/Materials Required: 2-22 Engine shut off 4-22 Battery cables disconnected Antifreeze (Item 1, Appendix E) Oil (Item 10, Appendix E) Teflon Tape (Item 15, Appendix E) WARNING A hot engine can cause severe burns. a. Water Temperature Switch. WARNING Electrical shock hazard exists. Disconnect battery cables (para. 4-22). (1) Removal. (a) Drain cooling system (para. 4-46. c.). ( Water Temperature Switch b) Working on left side of engine disconnect wire from water temperature switch (1). (c) Remove water temperature switch (1) from thermostat housing (2). Tape opening. 4-96

Privacy Statement
Press Release
Contact