SERVICE MANUAL
Fig. 13. Removing or Installing Window Glass
INSTALL
1.
Insert window glass through access opening
(Fig. 13).
2.
Enter glass into front run channel.
3.
Slide rear run channel and channel seal onto
rear edge of glass.
4.
Secure rear run channel retainer to upper and
lower mounting brackets with bolts and washers.
5.
When assured that glass will slide easily from
top to bottom in window channels, move window
to lowered position.
Fig. 14. Window lass Fastener Crow Section
1.
Fastener, Lower Half
2.
Fastener, Upper Half
3.
Window Guide
4.
Screw
5.
Window Glass
6.
Temporarily install regulator handle and turn
regulator lever to engage with bottom edge of
window.
7.
Install window guide and regulator lever stud to
window glass using the two fastener assemblies
(Fig. 14) through holes provided in glass.
8.
Operate regulator handle to make sure all
components have been assembled correctly.
9.
Reinstall access door.
Fig. 15 Removing Rear Run Channel and Seal
1.
Rear Run Channel
2.
Channel Seal
3.
Door Window Frame
DOOR GLASS REAR RUN CHANNEL AND
CHANNEL SEAL
The door glass rear channel seal (weather
stripping) is moulded for a compression fit in window
frame as well as in glass rear run channel. No clips are
required to retain it. Channel and seal are removed
together.
CTS-4065
PRINTED IN UNITED STATES OF AMERICA
Page 11
